Combined shower and BD-560E stainless steel eye washer

сombined shower and bd 560e stainless steel eye washer

Description

The combined BD-560E stainless steel shower and eye washer is used to temporarily slow down further harmful substances to personnel's body, face, and eyes when toxic and harmful substances (such as chemical liquids, etc.) fall on personnel's body, face, and eyes, or when the fire leads to personnel's clothing catching fire. Further treatment and care must comply with the doctor's recommendations to prevent or reduce the number of unnecessary accidents.

Main Body:

High quality 304 stainless steel.

Head:

2,54 sm stainless steel rotating nozzle.

Eye Wash Nozzle:

ABS spray 25,4 sm” ABS waste water recycle bowl

Shower Valve:

2,54 sm 304 stainless steel ball valve.

Eye Wash Valve:

1/2” 304 stainless steel ball valve.

Power Supply:

3,175 sm FNPT

Waste:

3,175 sm FNPT

Eye Wash Flow:

≥11.4L/min

Shower Flow:

≥75.7L/min

Hydraulic Pressure:

0.2MPa-0.6MPa.

Original Water:

Drinking water or filtered water.

Use of the environment:

Places where there are dangerous splashes of substances such as chemicals, hazardous liquids, solids, gases and so on.

Special Note:

If the acid concentration is too high, it is recommended to use 316 stainless steel. When the ambient temperature is below 0 ℃, use antifreeze eye wash. The eye wash and shower are made of high quality 304 stainless steel. An anti-scalding device can be installed to avoid the working medium in the pipe from being too hot after exposure to sunlight and causing the user to be scalded. The standard anti-scalding temperature is 35 ℃.