Eyewash stand BD-540E

Description

The BD-540E eye wash stand is used to temporarily slow down further damage to the body, face and eyes of the personnel by harmful substances when toxic and harmful substances (such as chemical liquids, etc.) come into contact with the body, face and eyes of the personnel or fire causes the personnel's clothes to catch fire. Further treatment and processing should be carried out according to the doctor's instructions to avoid or reduce unnecessary accidents.

Valve:

lug type flushing valve made of stainless steel ball valve, 2,54 sm 304.

Feed:

1/2" FNPT

Waste:

3,175 sm FNPT

Eye wash flow:

≥ 11.4L/min

Hydraulic pressure:

0.2MPa-0.6MPa

Source water:

drinking water or filtered water.

Use environment:

Places where hazardous substances such as chemicals, hazardous liquids, solids, gases and other polluted environments are splashed, where there is a possibility of combustion.

Special note:

If the acid concentration is too high, it is recommended to use 316 stainless steel. When the ambient temperature is below 0 ℃, use antifreeze for eye wash. An anti-scalding device can be installed to avoid the working medium temperature in the pipe after the standard temperature to prevent the sun's rays from scorching and causing burns to the user. 35 ℃.