Eyewash stand BD-540F

eyewash stand bd 540f

Description

The BD-540F eye wash stand is used to temporarily slow down further damage to the body, face and eyes of the personnel by harmful substances when toxic and harmful substances (such as chemical liquids, etc.) come into contact with the body, face and eyes of the personnel or fire causes the personnel's clothes to catch fire. Further treatment and care should be carried out according to the doctor's instructions to avoid or reduce unnecessary accidents.

Valve:

The eye wash valve is made of 2,54 sm" 304 stainless steel ball valve

Supply:

1/2" FNPT

Waste:

1 1/4" FNPT

Eye wash flow:

≥ 11.4L/min

Hydraulic pressure:

0.2MPa-0.6MPa

Source water:

Drinking water or filtered water

Used environment:

Places where there is splash of hazardous substances such as chemicals, hazardous liquids, solids, gas and other polluted environments where fire may occur.

Special Note:

If the acid concentration is too high, it is recommended to use 316 stainless steel. When using the ambient temperature below 0 ℃, use antifreeze to wash the eyes. An anti-scald device can be installed to avoid the medium temperature in the pipe being too high after exposure to the sun and causing burns to the user. The standard anti-scald temperature is 35 ℃.