Eyewash stand BD-540A

eyewash stand bd 540a

Description

The BD-540A eyewash stand is used to temporarily slow down further harmful substances to the body, face, and eyes of personnel when toxic and harmful substances (e.g., chemical liquids, etc.) fall on the body, face, and eyes of personnel or the fire leads to the ignition of personnel clothing. Further treatment and treatment should be carried out according to the doctor's instructions to prevent or reduce the number of unnecessary accidents.

Model:

BD-540A

Valve:

Eye wash valve is made of 1,27 sm" stainless steel 304 ball valve

Material:

Eye wash main body is made of 304 stainless steel

Supply:

1/2" FNPT

Waste:

1 1/4" FNPT

Power:

1/2" FNPT

Eye wash flow:

> 11.4L/min

Hydraulic pressure:

0.2MPa-0.6MPa

Source water:

Drinking water or filtered water

Use environment:

Places where there are dangerous splashes of substances such as chemicals, hazardous liquids, solids, gas and other polluted environments where combustion may occur.

Special note:

If the acid concentration is too high, it is recommended to use 316 stainless steel. When the ambient temperature is below 0 ℃, use antifreeze to wash the eyes. Anti-scalding device can be installed to avoid the working medium temperature in the pipe being too high after the standard temperature, preventing the scalding effect of sunlight and causing the user to burn. 35 ℃